How to Cut Laminate Countertops: A Step-by-Step Guide

How to Cut Laminate Countertops: Professional Advice

Your kitchen is being renovated and is ready to put in the laminate countertop. You notice that the countertop hasn’t been cut properly.

The countertop may be more wide than the cabinet that is installed or the wall that runs along the rear of the cabinet is not space.

How to cut laminate countertops?

Perhaps you are also one who enjoys making DIY and would like to make the laminate countertop by you.

The good news is that none of the issues are serious, which means you’ll be able to repair or remove the countertop made of laminate without the help of a professional.

How to Cut Laminate Countertops

However, cutting off the laminate countertop won’t help with the problem. The job requires more than this. It is essential to make sure that the laminate material isn’t chipping or cracking. An error could ruin the countertop completely and cost the user lots of cash.

There’s only one chance to make your counter precise and neat cut! We may have scared some of you We are there to assist you in the task.

Take some time to learn the proper techniques of cutting precisely to cut laminate countertops.

Why Cut Laminate Countertop

Why Cut Laminate Countertop?

Properly cutting laminate countertops is crucial to achieve a professional finish and avoid chipping.

Laminate countertops are a popular choice in kitchens due to their durability and affordability. However, incorrect cutting techniques can result in unsightly and damaged edges.

If the laminate is not cut carefully, chipping can occur along the cut line.

This can ruin the aesthetic appeal of the plastic finish of the countertop and may require expensive repairs or replacement high tooth count. Additionally, a poor cut can lead to rough edges that are difficult to clean, making maintenance a challenge.

To ensure a clean and chip-free cut, it is important to use the right tools and follow the correct cutting process.

A circular saw with a fine-toothed blade is generally recommended for cutting laminate. It is also essential to use safety measures like safety glasses and a push stick.

By cutting the laminate carefully, you can achieve smooth, clean edges that blend seamlessly with the rest of the countertop.

This creates a professional and finished look for your kitchen sink and counters.

In conclusion, cutting laminate properly is vital to avoid chipping and achieve a professional finish. With the right tools and techniques, you can maintain the beauty and durability of your laminate for years to come.

Preparing to Cut the Laminate Countertop

Before you begin cutting the laminate countertop, it is important to properly prepare yourself and the workspace.

READ ALSO ➡  The Best Pipe Dope for Black Iron Gas Pipe: A Buyer's Guide

Start by gathering all the necessary tools and materials, including a circular saw with a fine-toothed blade, safety glasses, a tape measure, a straight-cut edge, masking tape, a sharp blade or utility knife, and a push stick. Safety should always be a top priority, so be sure to wear safety glasses to protect your eyes from any flying debris.

Preparing to Cut the Laminate Countertop

Next, clear the workspace and ensure you have enough space to work comfortably. If you are working indoors, consider using drop cloths or plastic sheets to protect the surrounding area. Additionally, make sure the countertop is securely supported on a flat surface to prevent any wobbling or movement during the cutting process.

Lastly, measure and mark the desired cut line on the plastic laminate countertop using a masking tape measure and a straight edge. Double-check your measurements to ensure accuracy before proceeding to the actual cutting process. By properly preparing yourself and the workspace, you can set yourself up for a successful and safe cutting experience.

Gather Necessary Tools and Materials

Gather Necessary Tools and Materials

Before diving into cutting laminate, it’s crucial to gather all the necessary tools and materials. Here’s a list of what you’ll need:

  1. Circular Saw: A circular saw with a fine-toothed blade is the primary tool for making straight cuts on laminate. Ensure the blade is sharp for a clean cut.
  2. Belt Sander: A sander aids in smoothing any rough edges after cutting. This tool is ideal for creating a clean finish.
  3. Jigsaw: A jigsaw with a fine-tooth blade is handy for making curved or rounded cuts on laminate. It allows for precision and versatility when dealing with irregular shapes.
  4. Working Table: A sturdy and flat surface serves as the foundation for cutting laminate. Ensure the working table saw is large enough to accommodate the entire countertop.
  5. Measuring Tape and Pencil: Accurate measurements are essential for a successful countertop cut. Use tape and pencil to mark the desired dimensions on the cut laminate countertop surface.
  6. Carpenter’s Square: A carpenter’s square ensures that all the measurements and lines drawn are perfectly perpendicular and accurate. It’s an indispensable tool for achieving precise cuts.
  7. Safety Goggles: Safety should always be a priority. Invest in a pair of safety goggles to protect your eyes from flying debris or particle board during cutting.

By gathering these necessary tools and materials, you’ll be well-equipped to cut laminate efficiently and effectively. Remember to take the appropriate safety measures and follow the manufacturer’s guidelines for each tool.

READ ALSO ➡  How to Get Playdough Out of Carpet - Ultimate Guide

How to Cut Laminate Countertops

Measure and Mark the Cutting Line

Measure and Mark the Cutting Line

To properly cut a laminate countertop, it is crucial to first measure and mark the cutting line accurately. This ensures that the countertop fits perfectly in its designated space. Here are the steps to measure and mark the cutting line:

  1. Measure the Length and Width: Begin by using a measure to determine the desired length and width of the countertop. Take accurate measurements to ensure a precise fit.
  2. Draw a Straight Line: Using a carpenter square, draw a straight line across the laminate slab where you want to make the final cut out. This line will serve as a guide throughout the cutting process.
  3. Mark the Width: Using a ascribing tool, mark the width of the countertop. It is important to make the width slightly wider than the actual measurement to allow for a slight overhang.

By carefully measuring and marking the cutting line, you can ensure that the laminate countertop will fit seamlessly into your kitchen space.

Always double-check your measurements before proceeding with the cutting process to avoid any mistakes.

Tracing the cut lines

Tracing the cut lines

Before cutting out a notch in the countertop, it is important to take accurate measurements and make multiple marks to ensure precision.

It is also recommended to check the corners for squareness unless angle cuts are necessary. This attention to detail will help ensure a successful and professional-looking result.

Preparing the countertop for the cut

Preparing the countertop for the cut

The cutting lines that appear on the wood and countertop.

If you do not have a suitable blade to cut or you wish to ensure that the laminated side it is recommended to apply blue tape to the lines cut. After that, draw the guidance lines onto the tape. This step is usually skipped as we’ve already performed it many times, and always employ the right blades and tools.

Installing the guidance fence

Installing the guidance fence

To ensure clean and straight cuts, it is important to use a fence guide. Attach the fence securely to the countertop using C-clamps.

Also, make sure that the saw blade aligns perfectly with the cut line at both ends.

Aligning the guidance fence

Aligning the guidance fence

Based on our experiences, we advise you to utilize an excellent jigsaw, as the product you purchase is what you get for your money.

But, the primary part of cutting a laminate countertop is choosing an edge that is downward-oriented teeth. Additionally, the cutting jigsaw blade must have a moderate to large tooth count.

If you use a knife with upward-orriented, sharp teeth can be a mistake and in the majority of instances, it can scratch your laminate counter. If you do not have the correct blade, it is possible placing the countertop on the top of it downwards.

READ ALSO ➡  How to Remove Dried Thinset From Tile - Detailed Manual

Cutting laminate countertop

Cutting laminate countertop

When using a jigsaw to cut a laminate countertop, it’s important to let the saw do the work and not force it.

This will ensure clean and precise cuts without damaging the countertop. It’s also recommended to set the saw at low speeds to prevent chipping the laminate surface. Alternatively, you can use a circular or table saw for straight cuts.

Set up for cutting laminate countertop

Set up for cutting laminate countertop

Following the initial cut, it is necessary to place the guide on the fence perpendicularly and secure it with a clamp. Be sure that the blade of your saw is exactly in line with the cut line.

If not, the counter will not be able to go over the cutting line. Make sure you hold the saw with firmness in order to ensure an adequate control, and you may not be able to make a straight cut.

How to cut laminate flooring

How to cut laminate flooring

The last thing to do is it is significant to be sure to finish the details. So, you can smooth out the edges of your countertop using the belt sander if the final result does not please you.


In conclusion, cutting laminate countertop may seem like a daunting task, but with the right tools and techniques, it can be done successfully. Remember to measure twice and cut once, take your time, and prioritize safety. By following these tips and being patient, you’ll be able to achieve a beautifully customized countertop that will elevate your kitchen’s aesthetics and functionality. So go ahead, grab those tools, and get ready to create a stunning space that you’ll be proud to show off to your friends and family!


What is the best tool to cut laminate countertops?

The best way of removing laminates is with hand saws or a circular saw, which is much faster. The circular saw blade produces sharp edges that chip the laminate. Your best bet is to lay this laminate face up and cut it back and forth.

Having the skills to work with an electric tool, you will be able to independently carry out various home repairs, including cutting a metal roof. The Complete Guide How to Cut Metal Roofing with Tin Snips.


Leave a Comment

Your email address will not be published. Required fields are marked *